IEEE 802.11b/g Wireless USB 2.0 Adapter | Version 1.2 |
hKey Entry: Select Hexadecimal or ASCII depending on the WEP key that is used.
hWEP Key Size: Select 64, 128, or 152 bit WEP key size.
hTransmit Key: Enter the WEP key in the four WEP key text boxes.
Click on the OK button to return to the previous window
3.2.4 Advanced Settings
Click on the Advanced tab in the Profile Management section. Here you can configure the transmit power level, wireless mode, power save mode, and network type.
3.2.4.1Infrastructure Settings
hWireless Mode: Place a check in the preferred frequency and data rates.
hPower Save Mode: Select Maximum, Normal, or Off from the drop- down list. Selecting Maximum will save the most power; this is recommended if using a laptop running on battery. For other instances, use the Normal of Off setting.
hNetwork Type: Select Infrastructure from the
h802.11 Preamble: This setting should be the same as the access point. If you are not sure of that setting, select Short & Long.
hPreferred APs: Click on this button to add specific access points to this profile. Then enter the MAC addresses of the specific access points and then click on the OK button to return to the previous window.
37