24V Power Supply Rack Unit | Dynacord DPP 4004 instruction

OWNER’S MANUAL

DPP 4004 / DPP 4012

24V POWER SUPPLY - RACK UNIT

•19" rack size with 2 HU

•primary sync switch-mode power supply; supports any 24 VDC modules in PA-systems

•covered mains switch

•status indicator LEDs (mains and battery)

•smooth initial current inrush

•short circuit protected

•forced ventilation

•mains voltage 104-127 / 207-253 VAC; internally switchable

•rernote output for the remote switching of power amplifiers

•remote output for the remote switching of the battery supply of power amplifiers

•emergency power supply via battery input connector

•switched mains output, max. 1 A

•delayed control output for the release of alarm-gong and summing modules

•direct output, 24 V max. 4 A / 12 A

•switched 24 V output for the connection of modules

•continuous emergency power supply via external battery module

•output for the connection of modules that need persistent power supply (e. g. DPM 4000/4001); max. 4 A / 12 A

•output for power fail recognition