Bass on OFF Mute on OFF | Directed Electronics HVM702 manual

AUDIO

VOLUME: 0–15

BASS: ON OFF

MUTE: ON OFF

H/P: A-CH B-CH — This setting allows the use of 2 headphones on different frequencies. If two video units are installed and; for example, each unit is playing a different video, using two headphones set at the same frequency may result in interference of the audio signal between the two headphones. One of the video units should be set to A-CH and the other to B-CH. A-CH is 2.3MHz left and 2.8MHz right, B-CH is 3.2MHz left and 3.8MHz right. Ensure that the headphones being used are of different receive frequencies, or are capable of 2-channel reception.

MODE

NOTE: In the Mode selection use the S/T buttons to select the desired setting and press SEL to set the selected video mode.

FULL — A 4:3 picture is enlarged in the horizontal direction only, enabling viewing of a 4:3 picture (standard picture) without any clipping of the picture.

4:3 — Standard picture mode.

WIDE — A 4:3 picture is enlarged in the same pro- portion both vertically and horizontally. This setting is ideal for cinema-sized pictures (wide-screen).

DISP

PAL/NT: PAL NT — video format (PAL or NTSC)

UP/DN: UP DN — picture is inverted

LET/RIT: LET RIT — picture is mirrored imaged (left-right swapped)

10	© 2004 Directed Electronics, Inc.