Dell AP-135, W-AP135 AP-134 Indicator LEDs Label Function Action Status, Pwr, ENET0, ENET1

The module provides the following power interfaces:

∙48V DC 802.3af or 802.3at or PoE + interoperable Power-over-Ethernet (PoE) with intelli-source PSE sourcing intelligence

∙12V DC for external AC supplied power (adapter sold separately)

2.1.1.3Indicator LEDs

There are 5 bicolor (power, ENET and WLAN) LEDs which operate as follows:

Table 1- AP-134 Indicator LEDs
Label	Function	Action	Status
PWR	AP power / ready status	Off	No power to AP
		Red	Initial power-up condition
		Flashing – Green	Device booting, not ready
		On – Green	Device ready
ENET0	Ethernet Network Link	Off	Ethernet link unavailable
ENET1	Status / Activity
		On – Amber	10/100Mbs	Ethernet	link
			negotiated
		On – Green	1000Mbps	Ethernet	link
			negotiated
		Flashing	Ethernet link activity
11b/g/n	2.4GHz Radio Status	Off	2.4GHz radio disabled
		On – Amber	2.4GHz radio enabled in non-HT
			WLAN mode
		On – Green	2.4GHz radio enabled in HT
			WLAN mode
		Flashing – Green	2.4GHz Air monitor
11a/n	5GHz Radio Status	Off	5GHz radio disabled
		On – Amber	5GHz radio enabled in non-HT
			WLAN mode
		On – Green	5GHz radio enabled in HT WLAN
			mode
		Flashing – Green	5GHz Air monitor

8