Rev 1.0
I/O Card Installation 
The kit includes:
Table 9 - ConnectX® Dual-Port InfiniBand I/O Card Installation Kit
1 I/O Card | 1 connector board |
3 flathead screws | 1 plastic leg |
3 panhead screws |
|
| Figure 5: Installation Kit Parts |
x3
x3
4.3Installation Instructions
Remove the server from the chassis.
1.Connect an ESD strap to your wrist and to a valid ESD ground.
2.Push the latch and pull on the handle.
16
Mellanox Technologies