w w w . d e l l . c o m / s u p p l i e s s u p p o r t . d e l l . c o m
Network Set-Up
NOTE: For additional network
Print and Check the Printer Settings Page
1.Print the Printer Settings page.
a.When Ready to Print appears in the LCD, press Menu.
b.Press 
until Configure appears, and then press 
or
.
c.Press 
until Reports appears, and then press 
or 
.
d.Printer Settings is displayed. Press
. The Printer Settings page is printed.
2.Under the TCP/IP heading, verify the IP address.
If the IP address is 0.0.0.0, wait for a few minutes to resolve the IP address automatically, and then print the Printer Settings page again.
Run the Installation Software
1.Insert the Drivers and Utilities CD into your computer.
2.The Drivers and Utilities CD should launch the installation software automatically.
If the CD does not automatically launch, click Start →Run, type D:\CDFE.exe (where D is the drive letter of your CD), and then click OK.
3.When the Drivers and Utilities CD screen appears, click Network Installation - Install the printer for use on a network. If using Windows XP, Windows 2000, Windows NT 4.0, or Windows 2003 Server, go to step 4. For all other operating systems, go to step 5.
4.For local installation, select Local Installation - Install printer on this computer, and then click Next.
For remote installation:
a.Select Remote Installation - Install printer on one or more remote computers, and then click Next.
b.Enter your Administrator user name, password, and clients or servers and then click Add.
c.Click Next.
5.Select the network printer you would like to install. If you do not see your printer listed, click Update to refresh the list or click Add Printer to add a printer to the network. You may update the IP address and port name at this point. Click Next.
6.Select your printer from the list. If you would like to change the printer name listed, enter a new name in the Printer Name field.
24
Setting Up for Network Printing