Motorola BPR40 LED Indicator, On/Off and Volume Knob, Push-to-Talk PTT button, Channel Knob

LED Indicator

•Colors indicate various states of the radio

On/Off and Volume Knob

•Turn clockwise to turn radio ON and increase volume.

•Turn counter-clockwise to decrease volume and turn radio

Push-to-Talk (PTT) button

• Press to transmit and release to receive messages.

Programmable Buttons

•Frequently used features can be programmed here.

Channel Knob

• Turn knob to change channel.

Accessory Connector

• To connect compatible accessories to radio.

Programming Port

• To program the radio.

Speaker

• Where received messages are heard.

Microphone

• Speak into microphone when sending message.

LED Indicators
	Colour	State	Indication
	Red	Illuminated	Radio is transmitting.
		Blinking	Battery voltage is low.
	Green	Illuminated	Radio is receiving with PL/DPL disabled.
		Blinking	Radio is in active scanning mode.
	Orange	Illuminated	Radio is receiving with PL/DPL enabled.
		Blinking	An error has occured.

Audio Alert Tones

Tone Name	Tone Cadence		Description
In Chirp Tone			Programmable buttons are pressed.
Out Chirp Tone			Programmable buttons are pressed.
Bad Key Chirp			Invalid programmable button function (i.e. pressing
Tone			programmable button while button lock is activated.)
Talk Prohibit			Continuous tone is heard if PTT is pressed when transmit
Tone			is not allowed.
Low Battery			Repeating tone heard if battery level is low.
Alert Tone
Priority			Received priority channel in Priority Scan mode.
Channel Alert
Tone
Low Tone		High Tone

Accessories

Types	Part No.	Description
Antenna	PMAD4051_R	Mag One 150-174MHz Antenna
	PMAE4020_R	Mag One 450-470MHz Antenna
Audio Accessory	PMMN4008_	Remote Speaker Microphone
	PMLN4442_	Earbud with in-line mic and PTT/VOX* Switch
	PMLN4443_	Ear Receiver with in-line mic and PTT/VOX* Switch
	PMLN4445_	Ultra Lightweight Headset with In-line PTT/VOX* Switch
	PMLN4294_	Earbud with Microphone & PTT Combined
	PMLN4605_	Clear Acoustic Kit
	PMLN4606_	2-Wire Surveillance Kit with Clear Acoustic Tube
	PMLN4658 _	D-shell Earset with Boom Mic with PTT/VOX* Switch
Battery	PMNN4071_R	Mag One NiMH 1200mAH
	PMNN4075_R	Mag One Li-Ion 1500mAH
Carry Accessory	PMLN4743_	Mag One Spring Belt Clip
	PMLN4741_	Mag One Soft Leather Carry Case
	PMLN4742_	Mag One Hard Leather Carry Case
Charger	PMLN5041_R	Mag One Tri-Chem SUC Base
	PMLN5048_R	Mag One Tri-Chem SUC with Switching PS US Plug
	EPNN9288_	Switching Power Supply with AC Cord, US plug, 90–264 VAC

*Caution: Your radio does not support the VOX feature. Please set the accessory switch to ‘PTT’. If the accessory switch is set to ‘VOX’, your radio transmits constantly and never receives.

Programmable Buttons

•The following functions can be assigned as short press (press and release) or long press (press and hold for 1 second) in the programmable buttons.

Button	Function
High/Low Power	Selects desired power level to High† or Low*.
Volume Set	Allows you to check the audio and alert tone volume level.
Monitor	Allows you to monitor the current channel for activity; disables squelch.
Sticky Monitor*	The radio monitors continually until you press this button again.
Scan	Starts* or Stops† channel scan.
Nuisance Channel	Removes unwanted channel(s) temporarily from scan list during scan.
Delete†
Repeater/Talkaround	Toggles radio between functioning in Repeater mode† or Talkaround mode*.
PL/DPL	Enables†/Disables* radio from requiring matching PL/DPL to receive messages.
Button Lock	Locks* or unlocks† all buttons except PTT, Channel Knob and On/Off/Volume Knob.
Battery Save Mode	Toggles between functioning with Battery Saver ON* or Battery Saver OFF†.
Squelch	Selects desired squelch level: Normal† or Tight*.

†In Chirp Tone * Out Chirp Tone

• Your radio’s default functions are described below. If re-programmed, enter the new functions .

Press Type	Programmable Button 1			Programmable Button 2
	Default	Re-programmed	Default		Re-programmed
Short Press	Monitor		Scan
Long Press	Sticky Monitor		Nuisance Channel Delete