Delkin Devices MultiMedia Card to Floppy Disk Adapter guide

DDFLSPTH2-ADFlashPath Floppy Adapter for MultiMediaCard

FlashPath for Macintosh

The FlashPath access application for Macintosh is a read-onlyutility for transferring data from the MultiMediaCard to the hard drive via the FlashPath. You cannot write to, modify, delete files from or format the MultiMediaCard using the FlashPath.

Formatting on the Mac may make your card unrecognizable to your MMC device.

Macintosh System Requirements

Apple Macintosh PowerPC or PowerBook

•System: PowerPC 601 CPU or later (Power Macintosh)

•Hard Drive: 32MB or more, free space

•Operating System: MAC OS 7.5.1 or higher

•Apple 3.5” Internal 1.44MB floppy disk drive

PowerBook G3 Users: The Floppy Disk Drive must be installed in the right-side expansion bay to use FlashPath. FlashPath won’t work in a Floppy Disk Drive installed in the left-side expansion bay.

FlashPath is not compatible with removable floppy drives or external floppy drives (serial, parallel, PC Card or USB).

FlashPath is not compatible with high-capacity drives such as the LS-120 SuperDisk Drive.

Non-supported Systems:

•Multiple CPU systems (dual processors).

•PowerMac 8500/180 - B1 running MacOS 7.5.3 rev 2.2

•Centris 650 (68040/16 Mhz) running MacOS 7.6.1

•Quadra 610 (680404/20 Mhz) running MacOS 7.5.3

•iMac

Software Installation for Macintosh OS 7.5.1+

Before using the FlashPath, you must install the “Read-MMC-FlashPath” program located on the accompanying CD-ROM.

Prior to any software installation always ensure you have backed up your hard drive and prepared a recovery disk.

1.Insert the Driver CD-ROM, then double-click on the CD icon when it appears.

Figure 7:

The FlashPath

MultMediaCard

Installer

Delkin Devices User’s Manual

Page 7