Delkin Devices MultiMedia Card to Floppy Disk Adapter manual FlashPath for IBM Compatible PCs

DDFLSPTH2-ADFlashPath Floppy Adapter for MultiMediaCard

FlashPath for IBM Compatible PCs

When using FlashPath in an IBM PC system, files may be moved both to and from a MultiMediaCard via the FlashPath. It also comes with several utilities.

PC System Requirements

IBM-PC or fully compatible desktop or laptop PC.

•System requires 486 (or later) or Pentium processor

•Operating System: Windows 2000/ME/98/95/NT 4.0 (SP3+)

•Standard 3.5” Floppy Disk Drive as drive A: or B:

FlashPath is not compatible with removable floppy drives or external floppy drives (serial, parallel, PC Card or USB).

FlashPath is not compatible with high-capacity drives such as the LS-120 SuperDisk Drive.

Non-Supported Systems:

•RISC based systems (Alpha AXP, MIPS R4x00, or PowerPC)

Driver Software Installation for Windows 2000/ME/98/95/NT4.0

Before using the FlashPath, you must install the device drivers located on the accompanying CD-ROM. For the latest drivers you can visit www.delkin.com

SPECIAL NOTE FOR NTFS-BASED SYSTEM USERS: Because of the NTFS file system security features, it is not possible to boot the system and access the hard disk from a standard bootable DOS disk (e/g/ a Windows 98/95 recovery disk.

Therefore, prior to the installation of FlashPath software to Windows 2000, or any system using NTFS, please ensure you have prepared a recovery disk set as detailed in Microsoft’s documentation.

Prior to any software installation always ensure you have backed up your hard drive and prepared a recovery disk.

Figure 3:

Driver

Installation

Menu

Delkin Devices User’s Manual Page 3