Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual
Removing the Hard Drive
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
1.Remove the M3 x
2.Slide the drive door up until the drive assembly tabs disengage from the door slots in the bottom case assembly.
3.Pull the hard drive straight out of the bottom case assembly.
Replacing the Hard Drive
1.Gently push the hard drive into the drive bay until the drive door is flush with the computer case.
2.Push down on the drive door until it snaps into place.
3.Replace the M3 x