Dell C500 manual

Page 19

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

1.Remove the hard drive.

2.Remove the center control cover.

a.Use a scribe to lift the right edge of the center control cover and pry it loose from the bottom case assembly.

b.Lift the center control cover up and away from the bottom case assembly.

3.Close the display.

4.From the back of the computer, remove the five M2.5 x 5-mm screws labeled with the "circle D." There are two screws on the right hinge and three screws on the left hinge.

5.Open the display assembly approximately 180 degrees and support the display assembly so it does not open past this position.

6.Remove the two M2 x 3-mm screws that secure the EMI shield bracket to the system board assembly.

7.Remove the flex cable EMI shield retention bracket that covers the display-feed flex cable

file:///F/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (12 of 40) [2/28/2004 7:53:33 AM]

Image 19

Contents Page Before You Begin Recommended Tools Screw Identification Screw Placement Page Display Assembly Latch Each for 14.1-inch XGA display panels Exploded View ComponentsHard Drive Hard DriveRemoving the Hard Drive Memory ModuleReplacing the Hard Drive Memory Module Cover Removing the Memory Module CoverMemory Modules Replacing the Memory Modules Removing the Memory ModulesMini-PCI Card Assembly Replacing the Mini-PCI Card Assembly Removing the Mini-PCI Card AssemblyRemoving the Keyboard Assembly Keyboard AssemblyRemoving the Keyboard Screws Keyboard Keyboard Connector Replacing the Keyboard AssemblyDisplay Assembly Removing the Display AssemblyPage Page Removing the 14.1-Inch Display Assembly Bezel Removing the 14.1-Inch Display Panel Remove the display assemblyDisplay-Feed Flex Cable Replacing the 14.1-Inch Display PanelInch Display Assembly Bezel and Panel Removing the 12.1-Inch Display Panel Removing the 12.1-Inch Display Assembly BezelReplacing the 12.1-Inch Display Panel Replacing the Display-Assembly Top CoverRemove the hard drive Removing the Display Assembly Latch Display Assembly LatchDisplay Assembly Latch for 14.1-Inch XGA Display Panels Removing the Hinge Covers Hinge CoversRemoving the Hinge Covers Hinge Covers Replacing the Hinge CoversPalmrest Assembly Removing the Palmrest Assembly Screws Removing the Palmrest AssemblyPalmrest Assembly Removing the Microprocessor Thermal Cooling Assembly Microprocessor Thermal Cooling AssemblyMicroprocessor Thermal Cooling Assembly Removing the Hybrid Cooling Fan Hybrid Cooling FanHybrid Cooling Fan Microprocessor Modules Microprocessor ModuleReplacing the Microprocessor Module Removing the Microprocessor ModuleRemoving the Reserve Battery Reserve BatteryReserve Battery Replacing the Reserve Battery Speaker Assemblies Speaker AssembliesRemoving the Speaker Assemblies Routing the Left Speaker CableRemove the hard drive Replacing the Speaker Assembly System Board AssemblyRemoving the System Board Assembly Screws Removing the System Board Replacing the System Board System Board AssemblyBattery and Modular Bay Latch Assemblies Battery and Modular Bay Latch AssembliesRemoving the Battery and Modular Bay Latch Assemblies Back to Contents