Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card
How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC
5
Cisco IOS Release 12.3(14)T
How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC
To configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC, complete the following
tasks:
•Configuring the Asynchronous Interface, page5
•Configuring the Country Code, page7
•Upgrading the Modem Firmware, page11
•Verifying the Modem Firmware Upgrade, page13

Configuring the Asynchronous Interface

Complete the following steps to configure the asynchronous interface on the Cisco WIC-1AM-V2 and
WIC-2AM-V2 Analog Modem WIC.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface async number
4. ip unnumbered type number
5. encapsulation ppp
6. dialer in-band [no-parity | odd-parity]
7. dialer string number
8. dialer-group group-number
9. async mode interactive
10. peer default ip address pool poolname
DETAILED STEPS
Command or Action Purpose
Step1 enable
Example:
Router> enable
Enables privileged EXEC mode.
•Enter your password if prompted.
Step2 configure terminal
Example:
Router# configure terminal
Enters global configuration mode.