Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card
How to Configure the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WIC
11
Cisco IOS Release 12.3(14)T
Upgrading the Modem Firmware
Complete these steps to upgrade the firmware in the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog
Modem WIC.
SUMMARY STEPS
1. enable
2. upgrade modem firmware [all | slot slot | wic nm-slot/wic-slot] file source
3. exit
Step6 transport input {all | lat | mop | nasi | none |
pad | rlogin | telnet | v120}
Example:
Router(config-line)# transport input all
Defines which protocols can be used to connect to the line.
For this feature, all is recommended.
Step7 Router# exit
Example:
Router(config-line)# exit
Exits the line configuration mode.
Step8 exit
Example:
Router(config)# exit
Exits global configuration mode.
Step9 exit
Example:
Router# exit
Exits privileged EXEC mode.
Command or Action Purpose