Dell PCI3 manual This chapter describes how to install the following options, Microprocessors

Page 1

This chapter describes how to install the following options:

This chapter describes how to install the following options:

Peripheral Component Interconnect (PCI) expansion cards

System memory

Microprocessors

This chapter also includes instructions for replacing the system battery, if necessary.

Use Figure 8-1 to locate the system board features.

support.dell.com

Installing System Board Options 8-1

Image 1

Contents Use Figure 8-1 to locate the system board features This chapter describes how to install the following optionsInstalling System Board Options Peripheral Component Interconnect PCI expansion cards System memoryconnector POWER1 main power inputinterface connector connectors PARALLELFollow this general procedure to install an expansion card 8-4 Installation and Troubleshooting Guide 4. Insert the expansion card into the expansion-card connector3. Unlatch the card guide as shown in Figure unlatching card guidePage Follow this general procedure to remove an expansion card front of memory module socketcomputer 8-8 Installation and Troubleshooting Guide Use the following procedure to install a memory module see Figure The following items are included in the microprocessor upgrade kit 1. Remove the computer cover according to the instructions in “Removing the Computer Cover,” in Chapter 5. Remove the heat sink Page 9. Install the microprocessor chip in the socket see Figure socket securing clip heat sink microprocessor chipVRM socket VRM latches microprocessor13. Connect the FAN1 connector 14. Replace the air shroud Invalid configuration information - please run SETUP program Time-of-day not set - please run SETUP programStrike the F1 key to continue F2 to run the setup utility 8-18 Installation and Troubleshooting Guide battery BATTERY socket10. Turn off your computer, and unplug it for at least 10 minutes 8-20 Installation and Troubleshooting Guide