Dell 320 Removing the Back Cover, Replacing the Back Cover, Remove the optical drive

Back to Contents Page

Back Cover

Dell™ Vostro™ 320 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Back Cover

NOTE: You may need to install Adobe® Flash® Player from Adobe.com to view the following illustrations.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the front-bezel panel.

3.Remove the internal panel.

4.Remove the I/O cover.

5.Remove the hinged stand.

6.Remove the optical drive.

7.Remove the screws that secure the back cover to the computer.

8.With the back cover resting on a clean surface, lift the chassis away from the back cover , turn over the chassis, and then lay the chassis aside.

NOTE: While replacing the chassis, position the side with USB and firewire connectors before you position the rest of the computer in place.

Replacing the Back Cover

To replace the back cover, perform the above steps in reverse order.

Back to Contents Page