1 screws (4) 2 camera cable
3camera cable 4 display panel
6.Lift the display panel out of the display cover.
7.Remove the four screws (two on each side of the display panel) securing the brackets to the display panel and remove the brackets.
8.Turn over the display panel.
1 display panel bracket (1 left, 1 right) 2 screws (4 total; 2 on each side)
9. Using the display cable
1display cable connector 2 display cable
3display cable
Replacing the Display Panel
1.Follow the instructions in Before You Begin.
2.Connect the display cable to the board at the back of the display panel.