Back to Contents Page
Camera (Optional)
Dell Studio™ 1555 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.
Removing the Camera Module
1.Follow the instructions in Before You Begin.
2.Remove the display panel (see Removing the Display Panel).
3.Remove the two screws that secure the camera to the display cover.
4.Lift the camera board from the display cover.
1 | screws (2) |
|
|
|
|
|
|
|
Replacing the Camera Module
1.Follow the instructions in Before You Begin.
2.Replace and tighten the two screws securing the camera to the display cover.
3.Replace the display panel (see Replacing the Display Panel).