Dell 9100 service manual Display Bezel

Page 52

Display Assembly and Display Latch: Dell Inspiron XPS and Inspiron 9100 Service Manual

1

M2.5 x 6-mm screws (6)

5

display bezel

2

rubber display bumpers (6)

6

display panel

3

M2.5 x 6-mm shoulder screws (2)

7

display base

4

screw covers (2)

8

M2.5 x 3-mm screws (8)

Display Bezel

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Remove the display.

3.Remove the six rubber display bumpers and two screw covers.

4.Remove the six M2.5 x 6-mm screws and two M2.5 x 6-mm shoulder screws and remove the display bezel.

file:///I/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Inspiron/9100/9100_SERVICE_MANUAL/display.htm (5 of 10)6/21/2004 1:16:06 AM

Image 52
Contents Abbreviations and Acronyms Model PP09L February 2004 Rev A00 Before You Begin Preparing to Work Inside the ComputerPage Recommended Tools Screw Identification Each Display Ground Screw 1 each Palm Rest Video Card Back to Contents Memory Module, Mini PCI Card, and Devices Memory ModulePage Page Mini PCI Card Page Page Page Connect the antenna cables to the Mini PCI card Devices Page Page Device latch release Pull the device out of the module bay Back to Contents System Components Back to Contents Subwoofer Page Back to Contents Bluetooth Card Back to Contents Hard Drive Turn over the computer and remove the M3 x 3-mm screwPage Returning a Hard Drive to Dell Fans Page Page Captive screws 2 2 fan cover Hinge Covers Page Page Back to Contents Keyboard Back to Contents Modem Removing the ModemInstalling the Modem Back to Contents Reserve Battery Back to Contents Display Assembly and Display Latch Page Display Page Display Bezel Display Panel Remove the display bezel Display Latch Remove the display bezel Back to Contents Remove the display assembly Keyboard BracketFPC cable pull-tab M2.5 x 6-mm screws 4 3 keyboard bracket Remove the display assembly Remove the keyboard bracket Palm RestPage M2.5 x 6-mm screws 4 2 touch-pad connector Video Card System board connector M2.5 x 6-mm screws 4 3 video card Microprocessor Thermal-Cooling Assembly Removing the Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly Microprocessor Module Removing the Microprocessor ModuleInstalling the Microprocessor Module Back to Contents Speakers M2.5 x 6-mm screws Speakers 3 speaker connector Display Release Latch M2.5 x 6-mm screws Display release latch 3 computer base System Board Removing the System BoardPage Page Installing the System Board Flashing the Bios Pin Assignments for I/O Connectors Video ConnectorVideo TV-Out Connector Ieee 1394 Connector Tmds DATA2 Tmds DATA3+ Tmds DATA2+
Related manuals
Manual 162 pages 20.69 Kb Manual 52 pages 11.04 Kb