Dell 469-3486 owner manual Installing the Heat-Sink Fan Assembly, Removing the Processor

Page 25

Installing the Heat-Sink Fan Assembly

1.Place and align the heat-sink fan assembly.

2.Tighten the captive screws to secure the heat-sink fan assembly.

3.Connect the CPU-fan cable to the system board.

4.Install:

a)palmrest

b)keyboard

c)battery

5.Follow the procedures in After Working Inside Your Computer.

Removing the Processor

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove:

a)battery

b)keyboard

c)palmrest

d)heat-sink fan assembly

3.Rotate the processor-cam screw in a counter-clockwise direction.

4.Lift up the processor and remove it from the computer.

25

Image 25

Contents Regulatory Model P18F Regulatory Type P18F0032 Dell Inc Contents Technical Specifications Contacting Dell Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerPage Page Recommended Tools Removing the BatteryInstalling the Secure Digital SD Card Installing the BatteryRemoving the Secure Digital SD Card Removing the Hinge CoverRemoving the Keyboard Installing the Hinge CoverPage Removing the Optical Drive Installing the KeyboardRemoving the Memory Module Installing the Optical DriveRemoving the Palmrest Installing the Memory ModuleInstalling the Palmrest Removing the Power-Button Board Removing the Hard Drive Installing the Power-Button BoardRemoving the Wireless Local Area Network Wlan Card Installing the Hard DriveRemoving the Coin-Cell Battery Installing the Wireless Local Area Network Wlan CardRemoving the USB Board Installing the Coin-Cell Battery Installing the USB Board Removing the Microphone Installing the MicrophoneRemoving the Heat-Sink Fan Assembly Removing the Processor Installing the Heat-Sink Fan AssemblyRemoving the System Board Installing the ProcessorInstalling the System Board Removing the Speakers Installing the Speakers Removing the Display Assembly Removing the Power-Connector Port and Bracket Installing the Display AssemblyPage Removing the Display Bezel Installing the Power-Connector Port and BracketRemoving the Camera Installing the Display BezelRemoving the Display Panel Installing the CameraPage Installing the Display Panel Removing the Low-Voltage Differential Signaling Lvds Cable Installing the Low-Voltage Differential Signaling Lvds Cable Page Navigation Keys Boot SequenceEnter System Setup OptionsAdvanced System and Setup Password Updating the BiosAssigning a System Password and Setup Password Page Battery Status Lights Enhanced Pre-Boot System Assessment ePSA DiagnosticsDevice Status Lights Diagnostic Beep CodesTechnical Specifications Feature Feature Vostro Type Physical Page Contacting Dell