Figure 1-3. Removing the Drive Bay Keys
1Screws (6)
2Drive locking flange
20.To remove the upper drive bay key, remove the three screws.
21.To remove the lower drive bay key, remove the three screws securing the key to the chassis.
22.Turn the key in the keylock to unlock the drive locking flange.
The drive alignment key cannot be removed when the drive locking flange is in the locked position.
23.Rotate each drive bay key so that the "6" or "8" stamped on the end of each key faces for ward and matches the drive capacity of the new backplane (see Figure
support.dell.com | Dell PowerEdge 6300 and 4x00 Systems SCSI Backplane Option |