Dell 1525, 1526 manual Removing the S-Video Board, Replacing the S-Video Board

Removing the S-Video Board

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

1.Follow the instructions in Before You Begin.

2.Remove all memory modules (see Removing Memory Module).

3.Remove the hard drive (see Removing the Hard Drive).

4.Remove the optical drive (see Removing the Optical Drive).

5.Remove all Mini-Cards (see Removing Mini-Card).

6.Remove the center control cover (see Removing the Center Control Cover).

7.Remove the keyboard (see Removing the Keyboard).

8.Remove the display assembly (see Removing the Display Assembly).

9.Remove the internal card with Bluetooth wireless technology, if installed (see Removing the Internal Card With Bluetooth® Wireless Technology).

10.Remove the palm rest (see Removing the Palm Rest).

11.Remove the ExpressCard cage (see Removing the ExpressCard Cage).

12.Remove the processor thermal-cooling assembly (see Removing the Processor Thermal-Cooling Assembly).

13.Remove the processor (see Removing the Processor Module).

14.Remove the system board (see Removing the System Board Assembly).

15.Remove the screw securing the S-Video board to the system board assembly.

16.Carefully disconnect the S-Video connector from the system board and seperate the S-Video board from the system board assembly.

1	screw	2	S-Video connector
3	S-Video board	4	system board

Replacing the S-Video Board

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

1.Align the S-Video board to the system board in the right direction and gently press to connect the S-Video connector to the system board.

2.Replace the screw securing the S-Video board to the system board assembly.

3.Follow the steps in Removing the S-Video Board in the reverse order.