1 | antenna cable connectors | 2 | securing screw |
|
|
|
|
5.Release the
6.Lift the card out of its system board connector.
1 | |
|
|
Replacing Mini-Card
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and realign the card.
NOTICE: To avoid damage to the
1.Insert the card connector into the system board connector at a
2.Press the other end of the card down into the slot on the system board until the card clicks into place.
3.Replace the securing screw.
4.Connect the cables to the
NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mini Card.
5.Secure unused antenna cables in the protective mylar sleeve.
6.Replace the cover and tighten the eight captive screws.