Dell 9010, W04C owner manual Removing the Display Panel

Page 37

NOTE: You can also use the following steps to disable a forgotten password.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)VESA stand

b)back cover

c)VESA mount bracket

d)system-board shield

e)memory

f)optical drive

g)hard drive

h)heat-sink assembly

i)power supply unit

j)input/output board shield

k)converter board

l)power-supply fan

3.Identify the PSWD jumper on the system board.

4.Remove the PSWD jumper from the system board.

NOTE: The existing passwords are not disabled (erased) until the computer boots without the jumper.

5.Install all the components removed in step 2.

NOTE: If you assign a new system and/or setup password with the PSWD jumper installed, the system disables the new password(s) the next time it boots.

6.Connect the computer to the electrical outlet and power-on the computer.

7.Power-off the computer and disconnect the power cable from the electrical outlet.

8.Repeat step 2.

9.Replace the PSWD jumper on the system board.

10.Install all the components removed in step 8.

11.Follow the procedures in After Working Inside Your Computer.

12.Power-on the computer.

13.Go to the system setup, and assign a new system or setup password. See System and Setup Password.

Removing the Display Panel

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the:

a)VESA stand

b)back cover

c)VESA mount bracket

d)system-board shield

e)input/output board shield

f)WLAN card

g)optical drive

h)hard drive

i)intrusion switch

j)power-button board

k)converter board

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Regulatory Model W04C Regulatory Type W04C001 Dell Inc. All Rights Reserved Contents Diagnostics System SetupTroubleshooting Your Computer Technical Specifications Contacting Dell Page Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerClick Shut Down Important Information Page Recommended Tools Removing and Installing ComponentsRemoving the Back Cover Installing the Vesa StandRemoving the Memory Installing the Back CoverRemoving the Vesa Mount Bracket Installing the MemoryRemoving the Touchscreen Board Installing the Vesa Mount BracketInstalling the Converter Board Installing the Touchscreen BoardRemoving the Converter Board Removing the Coin-Cell Battery Installing the System-Board ShieldRemoving the System-Board Shield Removing the Optical Drive Installing the Coin-Cell BatteryPage Removing the Hard Drive Installing the Optical DriveRemoving the Intrusion Switch Installing the Hard DriveInstalling the Intrusion Switch Installing the Wlan Card Removing the Wireless Local Area Network Wlan CardRemoving the Power-Supply Fan Installing the Power-Supply Fan Removing the Power Supply Unit PSU Removing the Heat-Sink Assembly Installing the Power Supply UnitInstalling the Heat-Sink Assembly Removing the Input/Output Board Shield Page Removing the Power-Button Board Installing the Input/Output Board ShieldRemoving the Processor Fan Installing the Power-Button BoardInstalling the Processor Installing the Processor FanRemoving the Processor Removing the Speakers Removing the System Board Installing the SpeakersSystem Board Layout Installing the System Board Clearing the Cmos Password Jumper SettingsRemoving the Display Panel Page Page Page Removing the Antenna Modules Installing the Display PanelRemoving the Camera Installing the Antenna ModulesInstalling the Camera Follow the procedures in After Working Inside Your Computer Navigation Keys Boot SequenceKeys Navigation System Setup Options Bios Setup Option Description Integrated NIC OptionSata Operation DrivesOption Description Admin Password Option Description USB ConfigurationSystem Password Internal HDD-0 PasswordPassword Configuration Option Description Strong PasswordPassword Bypass Password ChangeAdmin Setup Lockout Orom Keyboard AccessOption Description Multi Core Support Intel Speed StepAuto On Time Option Description AC RecoveryDeep Sleep Control Fan Control OverrideFastboot Keyboard ErrorsBlock Sleep Option Description Adapter WarningsWireless Device Enable Option Description Wireless SwitchOption Description Service Tag Configuration group is set to Enabled with ImageServerSystem Setup Options For Windows 8 only Boot List Option Advanced Boot Options Date/Time Boot SequenceOption Description Memory Information Displays Memory Audio Strong Password Password Configuration Option Description Password Change Expert Key Management Option Description Secure BootOptionDescription Wireless LANOption Description Numlock LED Option Description Wireless Device EnableClient Dhcp Option Description Client SubnetMask Updating the BiosComputer System and Setup PasswordPage Page Power Supply Built in Self-Test Enhanced Pre-Boot System Assessment ePSA DiagnosticsPage Important Information Diagnostic Power LED Codes Beep Codes Error MessagesMessage Page Specification FeatureFeature Specification Control keys Hdmi Power button light Environmental Page Contacting Dell
Related manuals
Manual 65 pages 48.69 Kb Manual 50 pages 20.29 Kb Manual 59 pages 18.68 Kb

9010, W04C specifications

The Dell W04C,9010 is a powerful and versatile workstation designed for professionals who demand high performance and reliability for their demanding tasks. Combining cutting-edge technology with a user-friendly design, this workstation is an ideal choice for industries such as engineering, 3D modeling, video editing, and scientific computing.

One of the main features of the Dell W04C,9010 is its processing power. It is equipped with the latest Intel Core or Xeon processors, which provide exceptional performance and multi-threading capabilities. This allows professionals to run multiple applications simultaneously without any lag, streamlining their workflow and enhancing productivity. With options for numerous cores and threads, users can choose a processor that best meets their specific needs.

In terms of graphics capabilities, the Dell W04C,9010 supports a range of high-performance GPUs, including NVIDIA and AMD options. These graphic cards offer remarkable rendering performance, making them suitable for graphic-intensive tasks such as 3D rendering, gaming, and complex visual simulations. With advanced technologies such as NVIDIA's RTX series, users benefit from real-time ray tracing and AI-assisted workflows, further improving their creative processes.

The workstation also boasts impressive memory and storage configurations. With support for up to 128GB of RAM or more, users can handle large datasets and resource-intensive applications effortlessly. Moreover, it features multiple storage options that include SSDs and HDDs, providing users with the flexibility to balance speed and capacity.

In terms of connectivity, the Dell W04C,9010 is equipped with an array of ports, including USB 3.1, USB-C, HDMI, and Ethernet options. This ensures seamless integration with various peripherals and networks, optimizing the overall user experience.

The Dell W04C,9010 is designed with cooling technologies that manage heat effectively, allowing for sustained performance even under heavy loads. Its sleek and durable chassis not only enhances aesthetics but also ensures longevity and reliability.

With its powerful hardware, advanced graphics capabilities, ample memory and storage options, and user-friendly design, the Dell W04C,9010 is an ideal workstation for professionals seeking high performance and reliability in their computing environment.
Top Page Image Contents