a)VESA stand
b)back cover
c)VESA mount bracket
d)touchscreen board
e)
f)input/output board shield
g)WLAN card
h)optical drive
i)hard drive
j)intrusion switch
k)power button board
l)converter board
m)processor fan
n)power supply unit
o)
p)
q)system board
r)display panel
3.Disconnect the camera cable from the connector on the camera module. Remove the screws that secure the camera to the display panel. Remove the camera module from the display panel.
Installing the Camera
1.Align the camera module to its slot on the display panel.
2.Tighten the screws to secure the camera module to the display panel.
3.Connect the camera cable to the connector.
4.Install:
a)display panel
b)system board
c)
43