Dell E6330 owner manual

Page 49

k)media board

l)display hinge covers

m)display assembly

n)display bezel

o)display panel

p)power LED board

3.Remove the screw that secures the left display-hinge wall to the display assembly.

4.Slide and remove the left display-hinge wall out of the display assembly.

5.Peel off the adhesive tape that secures the antenna cables to the display assembly.

6.Remove the antenna cables from the opening in the right display-hinge wall.

49

Image 49

Contents Regulatory Model P19S Regulatory Type P19S001 Dell Inc Contents Docking Port Information System Setup Technical Specifications Contacting Dell Page Before Working Inside Your Computer Working on Your ComputerAfter Working Inside Your Computer Turning Off Your ComputerPage Page Recommended Tools Installing the Secure Digital SD CardRemoving the Secure Digital SD Card Removing the Battery Installing the ExpressCardRemoving the ExpressCard Removing the Subscriber Identity Module SIM card Installing the BatteryRemoving the Hard Drive Installing the SIM CardInstalling the Hard Drive Removing the Optical Drive Installing the Optical Drive Removing the Base Cover Installing the Base CoverRemoving the Keyboard Trim Removing the Keyboard Installing the Keyboard TrimPage Installing the Keyboard Installing the Wlan Card Removing the Wireless Local Area Network Wlan CardRemoving the Bluetooth Module Installing the Bluetooth Module Removing the Memory Installing the MemoryInstalling the Coin-Cell Battery Removing the Coin-Cell BatteryRemoving the Palmrest Page Installing the Palmrest Removing the Media Board Removing the ExpressCard Cage Installing the Media BoardInstalling the ExpressCard Cage Removing the Speakers Removing the Display-Hinge Covers Installing the SpeakersRemoving the Display Assembly Installing the Display Hinge CoversPage Page Removing the System Board Installing the Display AssemblyPage Installing the System Board Removing the Heat Sink Removing the Power Connector Port Installing the Heat SinkInstalling the Power-Connector Port Removing the Input/Output I/O Board Removing the Display Bezel Installing the I/O BoardRemoving the Display Panel Installing the Display BezelRemoving the Camera and Microphone Module Installing the Display PanelInstalling the Camera and Microphone Module Removing the LED Board Removing the Display-Hinge Walls Installing the LED BoardPage Installing the Display-Hinge Walls Removing the Display Hinges Removing the Lvds and Camera Cable Installing the Display HingesPage Installing the Lvds and Camera Cable Docking Port Information Page Navigation Keys Boot SequenceKeys Navigation System Setup Options Parallel Port Option DescriptionSerial Port Sata OperationUSB PowerShare USB ConfigurationStealth Mode Control Keyboard IlluminationSystem Password Admin PasswordInternal HDD-0 Password Strong PasswordAdmin Setup Lockout Orom Keyboard AccessDefault Setting Enable Intel SpeedStep Default Setting Enable Intel TurboBoostPrimary Battery Configuration Wireless Radio ControlOption Description AC Behavior Auto On TimeTouchpad/PS-2 Mouse Default Setting Battery Slice ConfigurationNumlock Enable Keyboard ErrorsUpdating the Bios Password Type Description System and Setup PasswordPassword that you must enter to log on to your system Setup passwordPress Y to save the changes. The computer reboots Page Device Status Lights Enhanced Pre-Boot System Assessment ePSA DiagnosticsStorage LED Power LED Wireless LED Fault Description Battery Status LightsTemporary battery failure with AC adapter present Light Your laptopMemory ProcessorAudio Video Ports and ConnectorsCommunications Contactless Smart CardTouchpad KeyboardAC Adapter BatteryEnvironmental PhysicalPage Visit support.dell.com Contacting Dell