Dell 1150 Installing the System Board, Replace the display assembly, Replace the CD or DVD drive

Page 28

20.Lift the front of the system board out and away from the base plastics.

Installing the System Board

1.Insert the video connector on the replacement system board through the back of the base plastics.

2.Replace the two hex nuts that secure the video connector to the base plastics.

3.Replace the two M2.5 x 6-mm screws that secure the left antenna, which is located between the hard drive and optical drive cages, to the system board.

4.Replace the two M2.5 x 5-mm screws that secure the optical drive cage to the system board.

5.Replace the two M2.5 x 5-mm screws that secure the hard drive cage to the system board.

6.Replace the two M2.5 x 5-mm screws that secure the chipset heat sink to the system board.

7.Replace the battery bay shield, and reinstall the two M2.5 x 5-mm screws that secure the shield to the system board.

8.Replace the speakers.

9.Replace the microprocessor.

NOTICE: Before you replace the microprocessor thermal-cooling assembly, wipe the thermal grease off of the assembly with a clean paper towel. Squeeze all of the contents of the thermal grease packet (provided with the kit) on to the microprocessor thermal-cooling assembly.

10.Replace the microprocessor thermal-cooling assembly.

11.Replace the palm rest.

12.Replace the display assembly.

13.Replace the EMI shield.

14.Replace the keyboard.

15.Replace the Mini PCI card, modem, and memory module(s) that you removed from the old system board.

16.Replace the CD or DVD drive.

17.Replace the hard drive.

18.Insert the battery into the battery bay.

19.Connect the AC adapter to the computer and to an electrical outlet.

NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.

NOTE: After replacing the system board, enter the computer Service Tag sequence into the BIOS of the replacement system board.

20.Turn on the computer.

21.Insert the CD that accompanied the replacement system board into the appropriate drive, and turn on the computer. Follow the instructions on the screen.

Back to Contents Page

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Abbreviations and Acronyms Base Plastics Before You Begin Recommended ToolsTurning Off Your Computer Before Working Inside Your ComputerComputer Orientation Remove any installed PC Cards from the PC Card slotTurn off your computer Screw Identification Back to Contents Flashing the Bios From a Floppy Disk or a CD Flashing the BiosFlashing the Bios From the Hard Drive Back to Contents Microprocessor Module Installing the Microprocessor ModuleRemoving the Microprocessor Module Replace the microprocessor thermal-cooling assembly Display Display AssemblyRemove the CD or DVD drive Display Bezel DisplayInstalling the Display Panel Remove the display assembly Remove the display bezelDisplay Panel Removing the Display PanelRemoving the Display Latch Assembly Display Latch AssemblyInstalling the Display Latch Assembly Back to Contents EMI Shield EMI ShieldHard Drive Installing the Hard DriveRemoving the Hard Drive Back to Contents Keyboard Removing the KeyboardInstalling the Keyboard Palm Rest Palm RestBack to Contents Pinout Assignments for I/O Connectors USB ConnectorVideo Connector USB Connector Video ConnectorSpeakers Removing the SpeakersInstalling the Speakers System Board Removing the System BoardPage Replace the display assembly Installing the System BoardReplace the CD or DVD drive System Components Removing the Microprocessor Thermal-Cooling Assembly Microprocessor Thermal-Cooling AssemblyInstalling the Microprocessor Thermal-Cooling Assembly Back to Contents Back to Contents Memory, CD or DVD Drive, Modem, and Mini PCI Card MemoryRemoving the Memory Modules Memory CD or DVD Drive Modem Mini PCI CardCD or DVD Drive Installing the Memory ModulesRemoving the CD or DVD Drive Modem Installing the CD or DVD DriveRemoving the Modem Installing the Modem Mini PCI Card Removing the Mini PCI CardInstalling the Mini PCI Card
Related manuals
Manual 112 pages 24.79 Kb
Top Page Image Contents