Dell M70 manual Center Control Cover

Back to Contents Page

Center Control Cover

Dell Precision™ M70 Service Manual

CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

1.Follow the instructions in "Preparing to Work Inside the Computer."

2.Turn the computer top-side up and open it.

3.Remove the center control cover:

a.Open the display all the way (180 degrees) so that it lies flat against your work surface.

b.Starting on the right side of the computer, use a plastic scribe or flat-blade screw driver to pry up the center control cover.

1 center control cover

c.Lift the center control cover away from the computer, and lay it aside.

Back to Contents Page