bDisconnect the antenna cables from the Mini-Card.
cRemove the screw that secures the Mini-Card to the system board.
dLift the Mini-Card out of the system-board connector.
4If you are removing the WLAN Mini-Card:
a Follow the instructions from step 3 to step 9 in "Removing the Palm-Rest Assembly" on page 31.
b Disconnect the antenna cables from the Mini-Card.
c Remove the screw that secures the Mini-Card to the system board. d Lift the Mini-Card out of the system-board connector.
4
3
2
1
1 | antenna cables (2) | 2 | Mini-Card |
3 | screw | 4 | system-board connector |
CAUTION: When the Mini-Card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against Electrostatic Discharge" in the safety information that shipped with your computer.
