1 | display cable | 2 | screws (8) |
3 | display panel | 4 | camera cable connector |
|
|
|
|
6.Lift the display panel off the display cover.
7.Turn the display panel over and place it on a clean surface.
8.Lift the tape that secures the display cable to the display board connector and disconnect the display cable.
9.Peel off the camera cable from the back of the display panel.
1 | tape | 2 | display board connector |
|
|
|
|
3 | display cable | 4 | back of the display panel |
10. Remove the four screws (two on each side) that secure the display panel brackets to the display panel.
1 | display panel brackets (2) | 2 | screws (4) |
|
|
|
|
Replacing the Display Panel
1. Follow the instructions in Before You Begin.