Installing the Speakers
1.Align the speakers to their original position and tighten the screws to secure the speakers to the computer.
2.Route the speaker cable through its routing channel.
3.Connect the speaker cable to its connector on the system board.
4.Install:
a.SIM board
b.plamrest
c.keyboard
d.keyboard trim
e.SSD card
f.base cover
g.battery
5.Follow the procedures in After Working Inside Your computer.
Removing the Display-Hinge Cover
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.battery
b.base cover
c.keyboard trim
d.SSD card
e.palmrest
3.Remove the screws that secure the
4.Perform the following steps as shown in the illustration:
a.Remove the screws that secure the display hinge to the computer [1].
b.Remove the
22