Back to Contents Page
System Board Assembly
Dell™ Latitude™ D530 Service Manual
Removing the System Board Assembly
Replacing the System Board Assembly
Removing the System Board Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board.
1.Follow the instructions in Before You Begin.
2.Remove the hard drive (see Removing the Hard Drive).
3.Remove the memory module(s) (see Memory Module).
4.Remove the modem (see Removing the Modem).
5.Remove the
6.Remove the hinge cover (see Hinge Cover).
7.Remove the keyboard (see Removing the Keyboard).
8.Remove the display assembly (see Removing the Display Assembly).
9.Remove the processor
10.Remove the processor (see Removing the Processor Module).
11.Remove the palm rest (see Removing the Palm Rest).
NOTE: It is not required but is highly recommended that you remove the system fan (see System Fan) to allow easier access to the system board.
12.Remove the speaker assembly (see Removing the Speaker Assembly).
13.Remove the two M2.5 x