Dell PP17L manual Removing the Processor Thermal-Cooling Assembly

Page 10

Back to Contents Page

Processor Thermal-Cooling Assembly

Dell™ Latitude™ D530 Service Manual

Removing the Processor Thermal-Cooling Assembly

Replacing the Processor Thermal-Cooling Assembly

Removing the Processor Thermal-Cooling Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.

1.Follow the instructions in Before You Begin.

2.Remove the hinge cover (see Hinge Cover).

3.Remove the keyboard (see Keyboard).

4.Remove the captive screw that attaches the display cable to the system board.

5.Disconnect the display cable from the display cable connector on the system board.

6.Release the three antenna cables from the three antenna-securing clips.

7.Disconnect the three Mini-Card antenna cables (see Mini-Card).

1 antenna cable connectors (3) 2 processor thermal-cooling assembly 3 captive screws (6)

8.In consecutive order, loosen the six captive screws labeled "1" through "6," that secure the processor thermal-cooling assembly to the system board and remove the processor thermal-cooling assembly away from the computer.

Replacing the Processor Thermal-Cooling Assembly

CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.

1. Place the processor thermal-cooling assembly over the processor.

Image 10
Contents Page Turning Off Your Computer Before You BeginRecommended Tools Before Working Inside Your ComputerBack to Contents Flashing the Bios Dell Bios Flash window, click ContinueAdding the Card Internal Card With Bluetooth Wireless TechnologyRemoving the Card Back to Contents Coin-Cell Battery Removing the Processor Module Processor ModuleReplacing the Processor Module Back to Contents Removing the Processor Thermal-Cooling Assembly Processor Thermal-Cooling AssemblyReplacing the Processor Thermal-Cooling Assembly Back to Contents Display Assembly Removing the Display AssemblyRemoving the Display Bezel Replacing the Display BezelDisplay Panel Removing the Display PanelDisplay Latch Replacing the Display PanelReplace the support bracket and replace the M2 x 4-mm screw System Fan Ieee 1394 Connector USB Connector VideoTV-Out Connector GlossaryDevice driver See driver Page Page Module bay See media bay Page Video resolution See resolution Page Removing the Hard Drive Hard DriveReplacing the Hard Drive Returning a Hard Drive to Dell Hinge Cover Removing the Keyboard KeyboardReplacing the Keyboard Back to Contents Base Latch Memory Module Dimm B Memory ModuleDimm a Memory Module Verify Memory SizeBack to Contents Wireless Local Area Network Wlan Cards Mini-CardBack to Contents Modem Removing the ModemReplacing the Modem Palm Rest Removing the Palm RestReplacing the Palm Rest USB Connector Pin Assignments for I/O ConnectorsIeee 1394 Connector Video ConnectorVideo TV-Out Connector Removing the Speaker Assembly Speaker AssemblyReplacing the Speaker Assembly Back to Contents System Board Assembly Removing the System Board AssemblyReplacing the System Board Assembly Back to Contents Back to Contents
Related manuals
Manual 104 pages 50.83 Kb