Installing The Display Assembly
1.Insert the
2.Attach the display assembly hinges to the bottom base chassis.
3.Replace and tighten the screws to secure the display assembly to the computer.
4.Route the LVDS cable along its compartment and connect the connector to the system board.
5.Install the LVDS bracket.
6.Tighten the screws to secure the bracket in place.
7.Route the Wireless Local Area Network (WLAN) and/or Wireless Wide Area Network (WWAN) antennae along their compartments and connect the antennae to the WLAN and/or WWAN module.
8.Install the base cover.
9.Install the battery.
10.Follow the procedures in After Working Inside Your Computer.
86