Installing The Input/Output (I/O) Panel
1.Slide in the I/O panel at a 45 degree angle into its original position in the computer.
2.Tighten the screw securing the I/O panel to the computer.
3.Install the system board.
4.Install the ExpressCard Cage.
5.Install the smart card reader.
6.Install the palm rest assembly.
7.Install the keyboard.
8.Install the keyboard trim.
9.Install the modem connector.
10.Install the modem card.
11.Install the bluetooth.
12.Install the memory.
13.Install the processor.
14.Install the heatsink.
15.Install the wireless wide area network (WWAN) card.
16.Install the wireless local area network (WLAN) card.
17.Install the hard drive.
18.Install the optical drive.
19.Install the display assembly.
20.Install the base cover.
21.Install the battery.
22.Install the ExpressCard.
23.Install the secure digital (SD) Card.
24.Follow the procedures in After Working Inside Your Computer.
81