1
2
1 | display assembly | 2 screws (2) |
Replacing the Display Assembly
1Follow the instructions in "Before You Begin" on page 9.
2Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
3Route the display cable and
4Connect the display cable to the connector on the system board.
5Connect the
6Replace the hinge cover. See "Replacing the Hinge Cover" on page 57.
7Replace the USB board. See "Replacing the USB Board" on page 48.
8Replace the optical drive. See "Replacing the Optical Drive" on page 24.
Display
61