2
3
1
1 | camera module | 2 camera cable |
3 | tabs (2) |
|
Replacing the Camera Module
1Follow the instructions in "Before You Begin" on page 9.
2Connect the camera cable to the connector on the camera module.
3Use the alignment posts on the display cover to place the camera module in position and snap the camera module into place.
4Replace the display bezel. See "Replacing the Display Bezel" on page 63.
5Replace the display assembly. See "Replacing the Display Assembly" on page 61.
6Replace the hinge cover. See "Replacing the Hinge Cover" on page 57.
7Replace the USB board. See "Replacing the USB Board" on page 48.
70
Camera Module