Dell M1000E manual Activating FlexAddress Plus, Cmc

Page 45

Component

CMC

Minimum Required Version

Version 1.10 or later

NOTE: Components not appearing in the above table require no updates to enable the FlexAddress feature.

Activating FlexAddress Plus

FlexAddress Plus is delivered on the FlexAddress Plus Secure Digital (SD) card along with the FlexAddress feature.

NOTE: The SD card labeled FlexAddress only contains FlexAddress and the card labeled FlexAddress Plus contains FlexAddress and FlexAddress Plus. The card must be inserted into the CMC to activate the feature.

The updates, which are listed in the table below include, BIOS, iDRAC, and CMC firmware. As long as FlexAddress is activated, you must apply these updates before you can use FlexAddress Plus. If these updates are not applied, only FlexAddress works and not FlexAddress Plus.

Component

Minimum required version

 

 

Server Module BIOS

PowerEdge M710HD

iDRAC

Version 3.0 or later

CMC

Version 3.0 or later

 

 

For more information on the FlexAddress feature, see the following resources:

•The CMC Secure Digital (SD) Card Technical Specification document at support.dell.com.

•The Help link in the CMC Web interface.

•The "Using FlexAddress" chapter in the CMC User’s Guide.

Initial System Configuration

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Configuration Guide March Contents Configuring the I/O Modules Cisco SFS M7000e Infiniband Contents System Overview About Your SystemBlade Numbering-Half-Height Blades Blade Numbering-Full Height Blades Control Panel Features LCD Module LCD ModuleLCD Module Menus LCD Setup MenuMain Menu Server MenuEnclosure Menu Back Panel Features Back-Panel FeaturesBlades Front Panel Features-PowerEdge M910Front Panel Features-PowerEdge M905 and M805 Front Panel Features-PowerEdge M710HD 10. Front Panel Features-PowerEdge M710 11. Front Panel Features-PowerEdge M610x 12. Front Panel Features-PowerEdge M610 13. Front Panel Features-PowerEdge M600 and M605 CMC Module 14. CMC Module FeaturesCabling Guidelines CMC Daisy Chaining Enclosure Stacking15. CMC Daisy Chaining-Enclosure With Redundant CMC Modules IKVM Switch Module 16 shows the external features of the iKVM module Initial Setup Sequence Power Requirements Network InformationBefore You Begin Initial CMC Network Configuration Configuring the CMCInitial System Configuration Initial System Configuration To set a static IP address, type Logging in to the CMC Using the Web-Based InterfaceAdding and Managing CMC Users Configuring iDRAC Networking Using the Web-Based Interface Click Setup → Deploy Setting the First Boot Device for ServersInstalling or Updating the CMC Firmware Configuring and Managing PowerConfiguring Power Budget and Redundancy Updating Firmware in a Redundant CMC ConfigurationDownloading the CMC Firmware Updating the CMC Firmware Using Racadm Updating the CMC Firmware Using the Web-Based InterfaceConfiguring the Optional iKVM Switch Module Enabling iKVM Access to the Dell CMC ConsoleUpdating the iKVM Firmware Click Setup → Devices → Device Modify Tiering the Avocent iKVM Switch From an Analog KVM SwitchTiering the Avocent iKVM Switch From a Digital KVM Switch Viewing and Selecting Servers Initial System Configuration FlexAddress FlexAddress Plus Activating FlexAddressCMC Activating FlexAddress PlusInitial System Configuration Overview Configuring the I/O ModulesFabric a Fabric BFabric C Identifying Midplane Version Identifying Midplane Version Identifying Midplane Version Switch Modules Dell PowerConnect-KR 8024-k Switch Dell PowerConnect-KR 8024-k Switch Dell M8428-k 10 Gb Converged Network Switch Dell M8428-k 10 Gb Converged Network Switch Mellanox M2401G Infiniband Switch Module Mellanox M2401G DDR Infiniband Switch I/O ModuleMellanox M3601Q QDR Infiniband Switch I/O Module Mellanox M3601Q Infiniband Switch Module Cisco SFS M7000e Infiniband Switch Module Features Cisco SFS M7000e Infiniband Switch I/O ModuleCisco Catalyst Ethernet Switch I/O Modules Cisco Catalyst Ethernet Switch Module Features PowerConnect M6220 Ethernet Switch I/O Module 10. PowerConnect M6220 Ethernet Switch Module Features PowerConnect M6348 1 Gb Ethernet Switch I/O Module 11. PowerConnect M6348 Switch Module PowerConnect M8024 10 Gb Ethernet Switch I/O Module 12. PowerConnect M8024 Switch Module Brocade M4424 SAN I/O Module 13. Brocade M4424 SAN I/O Module Brocade M5424 FC8 I/O Module 14. Brocade M5424 FC8 I/O Module Dell 8/4 Gbps FC SAN Module 15. Dell 8/4 Gbps FC SAN Module Dell 10 GbE KR Pass-Through I/O Module Pass-Through Modules16. Dell 10 GbE KR Pass-Through I/O Module Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module 17. Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module Gb Ethernet Pass-Through Module 18 Gb Ethernet Pass-Through Module Gb Ethernet Pass-Through I/O Module 19 Gb Ethernet Pass-Through I/O Module 10/100/1000 Mb Ethernet Pass-Through I/O Module 20. Ethernet Pass-Through Module 4G Fibre Channel Pass-Through I/O Module 21 G Fibre Channel Pass-Through Module
Related manuals
Manual 2 pages 36.05 Kb Manual 103 pages 3.58 Kb Manual 108 pages 15.26 Kb Manual 86 pages 40.45 Kb Manual 12 pages 5.14 Kb
Top Page Image Contents