Dell M1000E manual Before You Begin, Switch Modules

Page 52

Before You Begin

Network Information

You can configure your I/O switch modules using:

•The CMC (see "Configuring a Switch Module Network Ethernet Port Using the Web-Based Interface" on page 52).

NOTE: The default IP address for the CMC is 192.168.0.120.

•The CMC CLI using serial console redirection.

•Direct access to the I/O module’s serial port (if supported).

•The I/O module’s default IP address (if supported).

Switch Modules

Configuring a Switch Module Network Ethernet Port Using the Web-Based Interface

You can use the CMC Web-based interface to configure an I/O module’s Ethernet port.

NOTE: Use this procedure to configure the switch’s out-of-band Ethernet port. The switch’s in-band management IP address is configured through the switch’s external ports. These two IP addresses must be different, and on different networks.

NOTE: To change settings on the I/O module configuration page, you must have Fabric Administrator privileges for the particular Fabric in which the module is installed.

NOTE: The network IP address set on the I/O module by the CMC is not saved to a configuration file. To save the IP address configuration permanently, use the connect switch-nRACADM command, or use a direct interface to the I/O module GUI.

NOTE: Do not attempt to configure I/O module network settings for Ethernet pass- through or Infiniband switches.

1Log in to the CMC’s Web-based interface. See "Logging in to the CMC Using the Web-Based Interface" on page 31.

2Select I/O Modules in the Chassis menu in the system tree.

52

Configuring the I/O Modules

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Configuration Guide March Contents Configuring the I/O Modules Cisco SFS M7000e Infiniband Contents About Your System System OverviewBlade Numbering-Half-Height Blades Blade Numbering-Full Height Blades Control Panel Features LCD Module LCD ModuleLCD Setup Menu LCD Module MenusMain Menu Server MenuEnclosure Menu Back-Panel Features Back Panel FeaturesFront Panel Features-PowerEdge M910 BladesFront Panel Features-PowerEdge M905 and M805 Front Panel Features-PowerEdge M710HD 10. Front Panel Features-PowerEdge M710 11. Front Panel Features-PowerEdge M610x 12. Front Panel Features-PowerEdge M610 13. Front Panel Features-PowerEdge M600 and M605 14. CMC Module Features CMC ModuleCMC Daisy Chaining Enclosure Stacking Cabling Guidelines15. CMC Daisy Chaining-Enclosure With Redundant CMC Modules IKVM Switch Module 16 shows the external features of the iKVM module Power Requirements Network Information Initial Setup SequenceBefore You Begin Configuring the CMC Initial CMC Network ConfigurationInitial System Configuration Initial System Configuration Logging in to the CMC Using the Web-Based Interface To set a static IP address, typeAdding and Managing CMC Users Configuring iDRAC Networking Using the Web-Based Interface Setting the First Boot Device for Servers Click Setup → DeployConfiguring and Managing Power Installing or Updating the CMC FirmwareConfiguring Power Budget and Redundancy Updating Firmware in a Redundant CMC ConfigurationDownloading the CMC Firmware Updating the CMC Firmware Using the Web-Based Interface Updating the CMC Firmware Using RacadmEnabling iKVM Access to the Dell CMC Console Configuring the Optional iKVM Switch ModuleUpdating the iKVM Firmware Tiering the Avocent iKVM Switch From an Analog KVM Switch Click Setup → Devices → Device ModifyTiering the Avocent iKVM Switch From a Digital KVM Switch Viewing and Selecting Servers Initial System Configuration FlexAddress Activating FlexAddress FlexAddress PlusActivating FlexAddress Plus CMCInitial System Configuration Configuring the I/O Modules OverviewFabric B Fabric aFabric C Identifying Midplane Version Identifying Midplane Version Identifying Midplane Version Switch Modules Dell PowerConnect-KR 8024-k Switch Dell PowerConnect-KR 8024-k Switch Dell M8428-k 10 Gb Converged Network Switch Dell M8428-k 10 Gb Converged Network Switch Mellanox M2401G DDR Infiniband Switch I/O Module Mellanox M2401G Infiniband Switch ModuleMellanox M3601Q QDR Infiniband Switch I/O Module Mellanox M3601Q Infiniband Switch Module Cisco SFS M7000e Infiniband Switch I/O Module Cisco SFS M7000e Infiniband Switch Module FeaturesCisco Catalyst Ethernet Switch I/O Modules Cisco Catalyst Ethernet Switch Module Features PowerConnect M6220 Ethernet Switch I/O Module 10. PowerConnect M6220 Ethernet Switch Module Features PowerConnect M6348 1 Gb Ethernet Switch I/O Module 11. PowerConnect M6348 Switch Module PowerConnect M8024 10 Gb Ethernet Switch I/O Module 12. PowerConnect M8024 Switch Module Brocade M4424 SAN I/O Module 13. Brocade M4424 SAN I/O Module Brocade M5424 FC8 I/O Module 14. Brocade M5424 FC8 I/O Module Dell 8/4 Gbps FC SAN Module 15. Dell 8/4 Gbps FC SAN Module Pass-Through Modules Dell 10 GbE KR Pass-Through I/O Module16. Dell 10 GbE KR Pass-Through I/O Module Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module 17. Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module Gb Ethernet Pass-Through Module 18 Gb Ethernet Pass-Through Module Gb Ethernet Pass-Through I/O Module 19 Gb Ethernet Pass-Through I/O Module 10/100/1000 Mb Ethernet Pass-Through I/O Module 20. Ethernet Pass-Through Module 4G Fibre Channel Pass-Through I/O Module 21 G Fibre Channel Pass-Through Module
Related manuals
Manual 2 pages 36.05 Kb Manual 103 pages 3.58 Kb Manual 108 pages 15.26 Kb Manual 86 pages 40.45 Kb Manual 12 pages 5.14 Kb

M1000E specifications

The Dell M1000E blade enclosure is a robust and versatile platform designed to optimize data center efficiency and streamline server management. A fundamental component of Dell's PowerEdge series, the M1000E is engineered to house multiple server blades in a compact, modular chassis, enabling organizations to conserve space and reduce power consumption while enhancing performance.

One of the main features of the Dell M1000E is its ability to accommodate up to 16 half-height server blades or 8 full-height server blades. This flexibility allows for a diverse range of configurations tailored to specific workloads, whether for virtualization, database management, or application hosting. The chassis provides shared power supplies and cooling, further contributing to the enclosure's efficient operation.

In terms of connectivity, the M1000E includes integrated high-speed networking capabilities. It can support multiple generations of networking technologies, ranging from Gigabit Ethernet to 10 Gigabit Ethernet, and offers options for Fibre Channel and InfiniBand connections. This extensive range of networking options ensures that organizations can integrate the M1000E into existing infrastructures seamlessly.

The Dell M1000E also utilizes advanced management tools to simplify administration and monitoring. One of the standout features is the Dell OpenManage suite, which provides a comprehensive set of tools for hardware management and system updates. Users gain insights into system health, performance, and power usage, enabling proactive maintenance and optimization of resources.

The enclosure is designed with scalability in mind. As businesses grow, the M1000E can be expanded easily by adding more blades without the need for significant reconfiguration. This scalability ensures that IT departments can respond rapidly to changing demands, ensuring that resources align with organizational requirements.

From a security standpoint, the M1000E provides multiple layers of protection, including secure access controls and configurable management interfaces. This helps safeguard sensitive information and ensures compliance with stringent data protection regulations.

Overall, the Dell M1000E blade enclosure represents a compelling solution for modern data centers, merging performance, efficiency, and scalability into a single chassis designed to meet the demands of today’s enterprise environments. Its advanced technologies and features make it a valuable asset for organizations looking to enhance their IT infrastructure.
Top Page Image Contents