2Click the plus (+) symbol next to Chassis in the left column, then click Servers.
3Click Setup Deploy.
4Select the protocol for the iDRAC setting (IPv4 and/or IPv6).
5Enable the LAN for the iDRAC on the server by selecting the check box next to the server beneath the Enable Lan heading.
6Enable or disable IPMI over LAN by using the check box next to the server under the Enable IPMI over LAN heading.
7Enable or disable DHCP for the iDRAC by checking or unchecking the check box next to the server under the DHCP Enabled heading.
8If DHCP is disabled, enter the static IP address, netmask, and default gateway for the iDRAC.
9Click Apply at the bottom of the page.
Setting the First Boot Device for Servers
The First Boot Device page allows you to specify the boot device for each blade. You can set the default boot device and you can also set a
To set the first boot device for some or all servers in the chassis:
1Log in to the CMC
2Click Servers in the system tree and then click Setup Deploy First Boot Device. A list of servers is displayed, one per row.
3Select the boot device you want to use for each server from the list box.
4If you want the server to boot from the selected device every time it boots, unselect the Boot Once check box for the server.
If you want the server to boot from the selected device only on the next boot cycle, select the Boot Once check box for the server.
5Click Apply.
34