Dell M1000E Before You Begin, Initial Setup Sequence, Power Requirements Network Information

Page 27

2

Initial System Configuration

Before You Begin

Power Requirements

CAUTION: The enclosure power supplies must be connected to a Type B or permanently-connected PDU and not directly to an electrical outlet. The power supplies require a 100–120 V or 200–240 V power source. You can select only one AC power input, as the system does not operate at both ranges simultaneously.

Network Information

If your network uses static addressing, you need the IP address, subnet mask, and gateway to configure the CMC and other modules in the enclosure.

Initial Setup Sequence

1Unpack the enclosure and install it in a rack.

For more information, see the Getting Started Guide and Rack Installation Guide at support.dell.com/manuals.

CAUTION: Do not turn on the blades (server modules) until you have configured the switch modules, as described in "Configuring the I/O Modules" on page 47.

2Connect the power supply units to a PDU.

3If an optional iKVM module is installed, connect the keyboard, video, and mouse to the enclosure control panel (see Figure 1-4) or to the iKVM module (see Figure 1-16).

NOTE: Connecting a keyboard, video, and mouse to the enclosure front panel disables video output to the iKVM back panel port.

4Press the power button on the enclosure control panel. See Figure 1-4.

Initial System Configuration

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Configuration Guide March Contents Configuring the I/O Modules Cisco SFS M7000e Infiniband Contents System Overview About Your SystemBlade Numbering-Half-Height Blades Blade Numbering-Full Height Blades Control Panel Features LCD Module LCD ModuleServer Menu LCD Setup MenuLCD Module Menus Main MenuEnclosure Menu Back Panel Features Back-Panel FeaturesBlades Front Panel Features-PowerEdge M910Front Panel Features-PowerEdge M905 and M805 Front Panel Features-PowerEdge M710HD 10. Front Panel Features-PowerEdge M710 11. Front Panel Features-PowerEdge M610x 12. Front Panel Features-PowerEdge M610 13. Front Panel Features-PowerEdge M600 and M605 CMC Module 14. CMC Module FeaturesCabling Guidelines CMC Daisy Chaining Enclosure Stacking15. CMC Daisy Chaining-Enclosure With Redundant CMC Modules IKVM Switch Module 16 shows the external features of the iKVM module Initial Setup Sequence Power Requirements Network InformationBefore You Begin Initial CMC Network Configuration Configuring the CMCInitial System Configuration Initial System Configuration To set a static IP address, type Logging in to the CMC Using the Web-Based InterfaceAdding and Managing CMC Users Configuring iDRAC Networking Using the Web-Based Interface Click Setup  Deploy Setting the First Boot Device for ServersUpdating Firmware in a Redundant CMC Configuration Configuring and Managing PowerInstalling or Updating the CMC Firmware Configuring Power Budget and RedundancyDownloading the CMC Firmware Updating the CMC Firmware Using Racadm Updating the CMC Firmware Using the Web-Based InterfaceConfiguring the Optional iKVM Switch Module Enabling iKVM Access to the Dell CMC ConsoleUpdating the iKVM Firmware Click Setup  Devices  Device Modify Tiering the Avocent iKVM Switch From an Analog KVM SwitchTiering the Avocent iKVM Switch From a Digital KVM Switch Viewing and Selecting Servers Initial System Configuration FlexAddress FlexAddress Plus Activating FlexAddressCMC Activating FlexAddress PlusInitial System Configuration Overview Configuring the I/O ModulesFabric a Fabric BFabric C Identifying Midplane Version Identifying Midplane Version Identifying Midplane Version Switch Modules Dell PowerConnect-KR 8024-k Switch Dell PowerConnect-KR 8024-k Switch Dell M8428-k 10 Gb Converged Network Switch Dell M8428-k 10 Gb Converged Network Switch Mellanox M2401G Infiniband Switch Module Mellanox M2401G DDR Infiniband Switch I/O ModuleMellanox M3601Q QDR Infiniband Switch I/O Module Mellanox M3601Q Infiniband Switch Module Cisco SFS M7000e Infiniband Switch Module Features Cisco SFS M7000e Infiniband Switch I/O ModuleCisco Catalyst Ethernet Switch I/O Modules Cisco Catalyst Ethernet Switch Module Features PowerConnect M6220 Ethernet Switch I/O Module 10. PowerConnect M6220 Ethernet Switch Module Features PowerConnect M6348 1 Gb Ethernet Switch I/O Module 11. PowerConnect M6348 Switch Module PowerConnect M8024 10 Gb Ethernet Switch I/O Module 12. PowerConnect M8024 Switch Module Brocade M4424 SAN I/O Module 13. Brocade M4424 SAN I/O Module Brocade M5424 FC8 I/O Module 14. Brocade M5424 FC8 I/O Module Dell 8/4 Gbps FC SAN Module 15. Dell 8/4 Gbps FC SAN Module Dell 10 GbE KR Pass-Through I/O Module Pass-Through Modules16. Dell 10 GbE KR Pass-Through I/O Module Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module 17. Dell 8/4 Gbps Fibre Channel Pass-Through I/O Module Gb Ethernet Pass-Through Module 18 Gb Ethernet Pass-Through Module Gb Ethernet Pass-Through I/O Module 19 Gb Ethernet Pass-Through I/O Module 10/100/1000 Mb Ethernet Pass-Through I/O Module 20. Ethernet Pass-Through Module 4G Fibre Channel Pass-Through I/O Module 21 G Fibre Channel Pass-Through Module
Related manuals
Manual 2 pages 36.05 Kb Manual 103 pages 3.58 Kb Manual 108 pages 15.26 Kb Manual 86 pages 34.71 Kb Manual 12 pages 5.14 Kb

M1000E specifications

The Dell M1000E blade enclosure is a robust and versatile platform designed to optimize data center efficiency and streamline server management. A fundamental component of Dell's PowerEdge series, the M1000E is engineered to house multiple server blades in a compact, modular chassis, enabling organizations to conserve space and reduce power consumption while enhancing performance.

One of the main features of the Dell M1000E is its ability to accommodate up to 16 half-height server blades or 8 full-height server blades. This flexibility allows for a diverse range of configurations tailored to specific workloads, whether for virtualization, database management, or application hosting. The chassis provides shared power supplies and cooling, further contributing to the enclosure's efficient operation.

In terms of connectivity, the M1000E includes integrated high-speed networking capabilities. It can support multiple generations of networking technologies, ranging from Gigabit Ethernet to 10 Gigabit Ethernet, and offers options for Fibre Channel and InfiniBand connections. This extensive range of networking options ensures that organizations can integrate the M1000E into existing infrastructures seamlessly.

The Dell M1000E also utilizes advanced management tools to simplify administration and monitoring. One of the standout features is the Dell OpenManage suite, which provides a comprehensive set of tools for hardware management and system updates. Users gain insights into system health, performance, and power usage, enabling proactive maintenance and optimization of resources.

The enclosure is designed with scalability in mind. As businesses grow, the M1000E can be expanded easily by adding more blades without the need for significant reconfiguration. This scalability ensures that IT departments can respond rapidly to changing demands, ensuring that resources align with organizational requirements.

From a security standpoint, the M1000E provides multiple layers of protection, including secure access controls and configurable management interfaces. This helps safeguard sensitive information and ensures compliance with stringent data protection regulations.

Overall, the Dell M1000E blade enclosure represents a compelling solution for modern data centers, merging performance, efficiency, and scalability into a single chassis designed to meet the demands of today’s enterprise environments. Its advanced technologies and features make it a valuable asset for organizations looking to enhance their IT infrastructure.
Top Page Image Contents