C |
| Use this button for direct access to the "Brightness" and "Contrast" control menu. |
|
| Brightness/Contrast |
|
|
| Hot Key |
|
|
|
|
|
|
C |
| Use these buttons to navigate and adjust the |
|
and |
|
|
|
D | Down |
|
|
|
|
| |
| (+) |
|
|
D |
| Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the |
|
|
| monitor |
|
| Auto Adjust |
|
|
|
| Auto Adjustment allows the monitor to |
|
|
| further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under DISPLAY SETTINGS. |
|
|
| NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached |
|
|
| cables. |
|
E |
| Use the Power button to turn the monitor on and off. |
|
|
| The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode. |
|
| Power button |
|
|
| (with power light |
|
|
| indicator) |
|
|
|
|
|
|
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for non Analog (non VGA) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2.Push the 
and 
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.
3.Push the MENU button once to activate the highlighted option.
4.Push the 
and 
buttons to select the desired parameter.
5.Push 
to enter the slide bar and then use the 
or 
button, according to the indicators on the menu, to make your changes.
6.Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon | Menu and | Description |
| Submenus |
|
|
|
|
| EXIT | Select to exit the main menu. |
|
|
|
| BRIGHTNESS | Use this menu to activate Brightness/Contrast adjustment. |
| & CONTRAST |
|
|
|
|
|
|
|