Attaching the Soundbar
NOTICE: Do not use with any device other than Dell Soundbar.
NOTE:Soundbar Power Connector
1.Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2.Slide the Soundbar to the left until it snaps into place.
3.Connect the Soundbar with the DC power connector.
4.Insert the mini stereo plug from the rear of the Dell Soundbar into the computer's audio output jack.
Removing the Stand
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
Complete the following steps to remove the stand:
1.Rotate the stand to allow access to the stand release button.
2.Press and hold the Stand release button.
3.Lift the stand up and away from the monitor .
Back to Contents Page