Setting Up the Monitor
Preparing the Stand
NOTE: The stand is attached when the monitor is shipped from the factory.
1.Place the monitor on a soft cloth or cushion.
2.Pull the monitor stand arm upwards clear of the monitor.
3.Place the monitor upright.
Connecting Your Monitor
WARNING: Follow the safety instructions before you perform any of the procedures in this section.
To connect your monitor to the computer:
1.Turn off your computer and disconnect the power cable from the wall outlet.
2.Connect the USB cable and only one of the following display cables to your computer:
•VGA cable
•DisplayPort cable
•HDMI cable
NOTE: Do not connect multiple display cables to the same computer.