Dell E190SB Operating the Monitor, Using the Front Panel, Brightness/Contrast Hot Key + buttons

Page 13

Back to Contents Page

Operating the Monitor

Dell™ E170S/E190S Flat Panel Monitor User's Guide

Using the Front Panel Controls

Using the On-Screen Display (OSD) Menu

Setting the Maximum Resolution

Using the Dell Soundbar (Optional)

Using the Tilt

Using the Front Panel

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characteristics as they change.

The following table describes the front panel buttons:

A

MENU

The 'MENU' button is used to open the on-screen display (OSD), select function icons, exit from menus and sub-menus, and to ex Accessing the Menu System.

B

B C

Brightness/Contrast Hot

Key

- and + buttons

Use this button for direct access to the 'Brightness' and 'Contrast' control menu.

Use these buttons to adjust (decrease/increase ranges) items in the OSD.

NOTE: You can activate automatic scroll feature by pressing and holding either + or - button.

C

Auto Adjust

Use this button to activate automatic setup and adjustment. The following dialog will appear on screen as the monitor self-adjus input:

Auto Adjustment in Progress...

Auto Adjustment button allows the monitor to self-adjust to the incoming video signal. After using 'Auto Adjustment', you can monitor by using the 'Pixel Clock' and 'Phase' controls in the OSD.

NOTE: Auto Adjust will not occur if you press the button while there are no active video input signals, or attached cables.

D

The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

The Power button turns the monitor on and off.

Power Button &

Image 13
Contents Dell E170S/E190S Flat Panel Monitor Users Guide About Your Monitor Package ContentsIdentifying Parts and Features Front View Product FeaturesBack View Front View Front panel controls Label DescriptionBack view Label Side ViewDescription/Use Power Management Modes Monitor SpecificationsBottom View Pin Assignments Flat Panel SpecificationsPreset Display Modes ResolutionElectrical Model E170S/E190SEnvironmental Physical CharacteristicsPlug and Play Capability LCD Monitor Quality & Pixel Policy Maintenance GuidelinesCaring for Your Monitor Appendix Setting Up Your Monitor Select Advanced Auto Adjust Using the Front PanelPower Button Operating the MonitorIcon Menu Name and Sub- menus Description Using the On-Screen Display OSD MenuThis is used to exit out of the Main Menu Image settingsPreset sRGB Color SettingsSettings Location PositionFactory Reset OSD Warning Messages Setting the Maximum ResolutionUsing the Tilt Using the Dell Soundbar OptionalTilt Back to Contents Setting Up Your Monitor Dell E170S/E190S Flat Panel Monitor Connecting Your Monitor Setting Up the MonitorConnecting the blue VGA cable Attaching the StandAttaching the Soundbar Optional Organizing Your CablesRemoving the Stand Back to Contents Built-in Diagnostics Solving ProblemsSelf-Test Common Symptoms What You Experience Possible Solutions Common ProblemsTroubleshooting the Dell Soundbar Optional Product-Specific ProblemsBack to Contents
Related manuals
Manual 2 pages 900 b