Dell E178FP appendix Power Management Modes, Physical Characteristics, Environmental

Page 6

Video input signals

Synchronization input signals

AC input voltage / frequency / current

Inrush current

Physical Characteristics

The following table lists the physical characteristics:

Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance

separate horizontal and vertical,

3.3V Cmos or 5V TTL level, positive or negative sync.

100 to 240 VAC / 50-60 Hz / 1.5A (RMS) Max.

110V: 30A (Max.)

220V: 60A (Max.)

Signal cable type

Dimensions (with stand):

Height

Width

Depth

Weight

Monitor (Stand and Head)

Monitor Flat panel only (VESA Mode)

Weight with packaging

D-sub: Detachable, Analog, 15pin, blue connector, attached to the monitor

380.6mm (14.98 inches)

374.7mm (14.75 inches)

140 mm (5.51 inches)

4.63kg (10.2 lb )

3.69kg (8.1 lb)

5.85kg (12.9 lb )

Environmental

The following table lists the environmental limitation:

Temperature:

Operating

5° to 35 °C (41° to 95 °F)

Nonoperating

-20° to 60 °C (-4° to 140° F )

Humidity:

Operating

10% to 80% (noncondensing)

Nonoperating

5% to 90% (noncondensing)

Altitude:

Operating

3,657.6 m (12,000 ft) max

Nonoperating

12,192 m (40,000 ft) max

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power-saving feature:

Power Management Definition

VESA's Mode

Video

H-sync

V-sync

Power Used

Power Saving

LED color

Image 6
Contents About Your Monitor Product Specific Problems Dell E178FP Flat Panel Monitor Users GuideAbout Your Monitor Front ViewBack View Side View Monitor Specifications Bottom ViewGeneral ResolutionPreset Display Modes Flat PanelPower Management Definition Power Management ModesPhysical Characteristics EnvironmentalPin Number Pin Side of the Connected Signal Cable Pin AssignmentsPlug and Play Capability LCD Monitor Quality & Pixel Policy Caring for your MonitorAppendix FCC Notice U.S. OnlyContacting Dell 900 0011Austria Vienna BahamasCanada North York Customer ServiceHardware Warranty Phone Support OntarioCzech Republic Prague ColombiaCosta Rica Denmark CopenhagenHome and Small Business 990France Paris Montpellier CorporateServer Support 001India Gold Support OnlyJamaica GeneralItaly Milan Japan KawasakiLuxembourg Korea SeoulLatin America Malaysia PenangNicaragua Netherlands AmsterdamNew Zealand Norway LysakerSt. Vincent St. Kitts and NevisSt. Lucia Grenadines002 Switzerland GenevaTaiwan ThailandFinancial Services UruguayA. Austin, Texas Virgin Islands VenezuelaUsing the Front Panel Buttons Setting Up Your MonitorConnecting Your Monitor MenuPower Button Indicator Using the OSDAuto Adjust On Screen Menu/Display OSDExit Image settingsIcon Menu Name and Sub- menus Description This is used to exit out of the Main MenuSettings Location Color SettingsPreset OSDLanguage Factory Reset Automatic Save OSD Warning MessagesUsing the Dell Soundbar Optional Soundbar Attachment to the MonitorBack to Contents Product Specific Problems Monitor Specific TroubleshootingCommon Problems Product Specific Problems Specific Symptoms What YOU Experience Possible SolutionsBack to Contents Attaching the Stand Using Your Monitor StandUsing the Tilt Organizing Your CablesRemoving the Stand
Related manuals
Manual 2 pages 34.03 Kb