Dell E177FP appendix Using the OSD, Connecting Your Monitor, Using the Front Panel Buttons

Page 18

Back to Contents Page

Using the OSD

Dell™ E177FP Flat Panel Monitor User's Guide

Connecting Your Monitor

Using the Front Panel Buttons

Using the OSD

Using the Dell™ Soundbar (Optional)

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the Safety Instruction.

1.Turn off your computer and unplug its power cable.

2.Connect the blue (analog D-sub) display connector cable to the corresponding video port on the back of your computer. (The graphic is for illustration only. System appearance may vary).

3.Connect the power cable for your display to the power port on the back of the display.

4.Plug the power cables of your computer and your display into a nearby outlet. Your monitor is equipped with an automatic power supply for a voltage range from 100 to 240 Volt at a frequency of 50/60 Hz. Be sure that your local power is within the supported range. If you are unsure, ask your electricity supplier.

5.Turn on your display and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.

Using the Front Panel Buttons

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows their numeric values as they change.

The following table describes the front panel buttons:

A

B

MENU

The 'MENU' button is used to open the on-screen display (OSD), select function icons, exit from menus and sub-menus, and to ex Accessing the Menu System.

Use this button for direct access to the 'Brightness' and 'Contrast' control menu.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents About Your Monitor Product Specific Problems Dell E177FP Flat Panel Monitor Users GuideAbout Your Monitor Front ViewBack View Side View Bottom View Monitor Specifications Power Management Modes Power Management DefinitionEnvironmental Pin Assignments Pin Number Pin Side of the Connected Signal CableCaring for your Monitor Plug and Play CapabilityAppendix FCC Notice U.S. OnlyContacting Dell Area Codes Local Numbers, Toll-Free NumbersPage Page Technical Support SalesCustomer Care GeneralPage Page Home and Small Business Your Monitor Set-up Guide BusinessBack to Contents Using the OSD Connecting Your MonitorUsing the Front Panel Buttons On Screen Menu/Display OSD Using the OSDAuto Adjust Power Button Indicator Brightness/Contrast Hot Key + buttonsImage settings Icon Menu Name Description and Sub MenusPositioning Horizontal Vertical Color Settings PositionReset Functions Language Factory ResetAutomatic Save Using the Dell Soundbar Optional OSD Warning MessagesSoundbar Attachment to the Monitor Product Specific Problems Monitor Specific TroubleshootingCommon Problems Product Specific Problems Specific SymptomsBack to Contents Attaching the Stand Using Your Monitor StandUsing the Tilt Organizing Your CablesRemoving the Stand Tilt
Related manuals
Manual 2 pages 7.35 Kb
Top Page Image Contents