Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock'adjustment and then use 'Phase' again.
Color Settings:
NOTE: This function may change the width of the display image. Use the 'Horizontal' function of the 'Position' menu to center the display image on the screen.
Adjusts the color temperature and saturation.
Normal Preset Selected to obtain the default (factory) color settings.
Blue Preset This color setting gives a bluish tint and is used for
Red Preset This color setting gives a reddish tint and is used for
User Preset Use the +/- buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from '0' to '100'.
NOTE: 'Color temperature' is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets ('Blue' and 'Red') favor blue and red accordingly. Select each one to see how each range suits your eye; or utilize the 'User Preset' option to customize the color settings to your exact choice.
OSD Settings: Each time the OSD opens, it displays in the same location on the screen. 'OSD Settings' (horizontal/vertical) provides control over this location.
Horizontal - and + buttons move OSD to the left and right.
Position
Vertical - and + buttons move OSD down and up.
Position
OSD Hold The OSD stays active for as long as it is in use.
Time: 'OSD Hold Time': Sets the length of time the OSD will remain active after the last time you pressed a button. Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
NOTE: Default 'OSD hold time' is 20 seconds.
OSD Lock Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons, except Menu, are locked.
All buttons can be locked or unlocked. Press the 'Menu' button for over 15 seconds to unlock the OSD menu.