Front Panel Control
•Power Button:
Press this button to switch ON/OFF of monitor’s power.
•Power Indicator:
Blue — Power On mode.
Orange — Power saving mode.
•MENU/ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in Contrast/Brightness OSD status.
•ECO
Activates the ECO control when the OSD is off or navigate through adjustment icons when OSD is on or adjust a function when function is activated.
•Image Ratio(+) :
Select monitor display mode. Press Image Ratio(+) button to change wide mode or 4:3 mode.
•Auto/Source:
1.When the OSD is off, press Auto/Source button continuously to select the input source showed in the message bar. Press Menu/Enter button to change to the selected source.
2.Auto configure hot key: When the OSD is closed, press Auto/Source button continuously about 2 second to do auto configure.
3.When OSD menu is in active status, this button will act as
OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To unlock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
NOTES
•Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
•Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.
•For maximum protection, repackage y tillour monitor as it was originally packed at the factory.
8