Dell 2408WFP appendix PIP Settings, When PIP/PBP activated

LCD Conditioning

Factory Reset

Exit Menu

PIP

SETTINGS

Reset all OSD settings to the factory preset values.

Push to exit the OSD main menu.

This function brings up a window displaying image from another input source.

PIP/PBP submenu when PIP/PBP OFF (main source is	PIP/PBP submenu when PIP/PBP OFF (main source is
VGA/DVI-D input)	input)

or

PIP/PBP submenu when PIP/PBP ON (main source is

VGA/DVI-D input)

PIP/PBP submenu when PIP/PBP ON (main source is

Back

Mode

When PIP/PBP activated

PIP/PBP Source

PIP Size

or

NOTE: When using DVI source, the contrast adjustment is not available.

Push to go back to the main menu.

There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)

Use and to browse and to select "Off", "PIP" or "PBP".

When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.

Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/S-Video/Composite/Component)

Use and to browse and to select.

Select PIP window size.

Use and to browse and to select.