Dell 2408WFP appendix Product Specific Problems, Universal Serial Bus USB Specific Problems

Page 39

COMMON SYMPTOMS

No Video

Low Quality DVD playback

Blinking Video

WHAT YOU EXPERIENCE

No signal indicator is displayed

Picture not crisp and some color distortion

Video is blinking or discontinuous

POSSIBLE SOLUTIONS

Check Video Input Selection

¡Composite: Yellow colored RCA jack

¡S-Video: Typically a round 4 pin jack

¡Component: Red, Blue, Green colored RCA jacks

Check DVD connection

¡Composite gives good picture

¡S-Video gives better picture

¡Component: Red, Blue, Green colored RCA jacks

Check DVD connection

¡Composite gives good picture

¡S-Video gives better picture

¡Component: Red, Blue, Green colored RCA jacks

Check if DVD player is HDCP compliant.

¡Some non-compliant players may exhibit blinking video and others will display a raster screen.

Product Specific Problems

SPECIFIC SYMPTOMS

WHAT YOU EXPERIENCE

POSSIBLE SOLUTIONS

 

 

Screen image is too small

Cannot adjust the monitor with the buttons on the front panel

The monitor will not go into power saving mode.

No Input Signal when user controls pressed

Image is centered on screen, but does not fill entire viewing area

OSD does not appear on the screen

No picture, the LED light is green. When press "+", "-" or "Menu" key, the message " No S-Video input signal ", " No Composite input signal " or " No Component input signal " will appear.

No picture, the LED light is green. When press "+", "-" or "Menu" key, the message " No S-Video input signal ", " No Composite input signal " or " No Component input signal " will appear.

Perform monitor reset on "Factory Reset"

Turn the monitor off and unplug the power cord and then plug back and power on

Move mouse or hit any key on the keyboard on the computer or activate video player, then access the OSD to set

Audio to " off " state.

Check the signal source Make sure the Computer is not in power saving by moving mouse or pressing any key on the keyboard.

Check to make sure Video Source to S- Video, Composite or Component is powered and playing video media.

Check whether the signal cable is plugged in and seated properly. Re-plug the signal cable if necessary.

Re-boot the computer or video player.

The monitor will not fill the entire screen.

The picture can't fill the height or width of the screen.

Due to the non-standard formats of DVDs, the monitor may not show the full screen pictures.

NOTE: When choosing DVI-D, DisplayPort, HDMI, S-Video, Composite or Component video, Auto Adjust function is not available.

Universal Serial Bus (USB) Specific Problems

SPECIFIC SYMPTOMS

USB interface is not working

WHAT YOU EXPERIENCE

USB peripherals are not working

POSSIBLE SOLUTIONS

Check that your monitor is powered ON.

Reconnect the upstream cable to your computer.

Reconnect the USB peripherals (downstream connector).

Switch off and then turn on the monitor again.

Reboot the computer.

High Speed USB 2.0 interface is slow.

High Speed USB 2.0 peripherals working slowly or not at all.

Check that your computer is USB 2.0 capable.

Verify USB 2.0 source on your computer.

Reconnect the upstream cable to your computer.

Reconnect the USB peripherals (downstream connector).

Reboot the computer.

Image 39
Contents Dell 2408WFP Flat Panel Monitor Users Guide About Your Monitor Solving ProblemsFront View Front panel controls Label Description Product FeaturesIdentifying Parts and Features Front View About Your MonitorSide View Back ViewBottom View Right side Left side Label DescriptionBottom view Label Description Pin Number Pin Side of the Connected Signal Cable Monitor SpecificationsPower Management Modes VGA ConnectorDVI Connector Video ConnectorComposite Video Connector DisplayPort Connector Component Video ConnectorHdmi Connector Flat Panel SpecificationsElectrical ResolutionPreset Display Modes Video Supported ModesEnvironmental Physical CharacteristicsUSB Upstream Connector USB Downstream ConnectorUniversal Serial Bus USB Interface Overview Card Reader SpecificationsFeatures USB PortsGeneral Maintenance GuidelinesPlug and Play Capability Caring for Your MonitorFCC Notice U.S. Only AppendixVisit support.dell.com Contacting DellSetting Up Your Monitor Setting Up Your Monitor Using the Front Panel Operating the MonitorInput Source Select PIP/PBP Select Using the OSD MenuDescription Auto AdjustIcon Menu Submenus Exit Brightness & ContrastPreset Modes Page Display Settings DDC/CI Other SettingsWhen PIP/PBP activated PIP SettingsHdmi OSD Warning MessagesVGA/DVI-D input Video Input VGA DVI-DUsing the Dell Soundbar Optional Setting the Optimal ResolutionTilt/Swivel Using the Tilt, Swivel and Vertical ExtensionVertical Extension Rotating the MonitorAdjusting the Rotating Settings of Your Operating System Setting Up Your Monitor Dell 2408WFP Flat Panel Monitor Attaching the Stand Setting Up the MonitorConnecting Your Monitor Connecting the white DVI cableOrganizing Your Cables Attaching the soundbar Removing the StandPage Solving Problems Troubleshooting Your MonitorCommon Problems OSD Video ProblemsUniversal Serial Bus USB Specific Problems Product Specific ProblemsSolution Troubleshooting the Dell SoundbarTroubleshooting the Card Reader ProblemBack to Contents
Related manuals
Manual 2 pages 59.84 Kb Manual 2 pages 48.1 Kb

2408WFP specifications

The Dell 2408WFP is a 24-inch flat-panel LCD monitor that has gained a solid reputation among users for its impressive features, versatility, and performance. Designed for both professional and personal use, this monitor has a native resolution of 1920 x 1200 pixels, providing a pixel density that allows for sharp and vibrant images.

One of the standout features of the Dell 2408WFP is its use of IPS (In-Plane Switching) technology, which offers wide viewing angles of up to 178 degrees both horizontally and vertically. This technology ensures consistent colors and brightness, making the monitor well-suited for tasks requiring accurate color reproduction such as graphic design, photo editing, and video production.

The Dell 2408WFP boasts a high dynamic contrast ratio, typically reaching up to 1000:1, which provides deep blacks and bright whites, enhancing the overall viewing experience. This characteristic makes it particularly effective for multimedia applications where visual fidelity is important.

This monitor comes equipped with a variety of connectivity options, including DisplayPort, DVI-D, VGA, and USB ports, making it compatible with a wide range of devices. The inclusion of these ports adds to its flexibility, allowing users to connect multiple computers or peripherals without the need for additional adapters.

Another significant aspect of the Dell 2408WFP is its ergonomic design; the monitor features height, tilt, swivel, and pivot adjustments for optimal viewing comfort. Users can easily customize the monitor's position to reduce strain during long hours of work.

In terms of energy efficiency, the Dell 2408WFP is Energy Star certified, which highlights its commitment to minimizing power consumption while delivering high performance. This feature not only leads to cost savings on energy bills but also demonstrates Dell's dedication to sustainability.

In conclusion, the Dell 2408WFP combines excellent image quality, versatile connectivity, ergonomic design, and energy efficiency, making it a popular choice among professionals and enthusiasts alike. Its superior performance and robust feature set ensure that it remains a relevant option in the monitor market, even years after its release. Whether for creative work, data analysis, or general use, the Dell 2408WFP offers a reliable and visually stunning experience.